Victor Aviation Service, Inc. NDT PRODUCTION SERVICES
1 (650) 354-1399
FAA Repair Station #BJ3R399L
Welding and Fabricating


Victor Aviation provides Exclusive Solutions using multiple State-of-the-Art techniques and application software development for manufacturing production processes and in service field development of electron beam fusion, arc and forged welding.

 

 
CScan Ultrasonic Inspection (UT-CSCAN)
C-Scan presentations are produced with an automated data acquisition system, in a computer controlled automated immersion scanning system using UT sensors with high image resolution.
 
Peizo Ultrasonic Inspection (UT)
Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements. Ultrasonic inspection can be used for flaw detection/evaluation, dimensional measurements and material characterization.
 
EMAT Ultrasonic Inspection (EMAT)
EMAT is a method which does not require contact or couplant, because the sound is directly generated within the material adjacent to the transducer. Due to this couplant-free feature, EMAT is particularly useful for automated inspection, and hot, cold, clean, or dry environments.
 
Cryogenic NDT Inspection (Cryo NDT)
Cryogenic (NDT) non-destructive testing method is based on the effect of the microcrystalline structure on the transmission of ultrasound. This method can be used to non-destructively evaluate the kinetics and completion of the time-temperature-transformation between structural phases and signal noise characteristics.
 
Thermography Inspection (IRT)
Thermal Imaging systems allow thermal information to be very rapidly collected over a wide area and in a non-contact mode. Instruments create pictures of heat flow rather than of light and are ideal for production line or in service applications.
 
Magnaflux Inspection (MPI)
Magnetic particle inspection (MPI) method of non destructive testing is a method for locating surface and sub-surface discontinuities in ferromagnetic materials for production or in service applications.
 
Eddy Current Inspection (EC)
Continuous wave Eddy Current testing is one of several non-destructive testing methods that use the electromagnetism principle. Conventional Eddy Current testing utilizes electromagnetic induction to detect discontinuities in conductive materials. Hand held in service or automated CScan is available.
 
Liquid Penetrant Inspection (LP)
Liquid Penetrant testing method employs a flouresant penetrating liquid , which is applied over the surface of the component under examination and enters the discontinuity or crack.
 
X-Ray Diffraction Inspection (XRD)
The nondestructive nature of the X-ray Diffraction technique has made residual stress and austenite characterization a primary tool for process optimization, design improvement and quality control testing of materials.
 
Computed Tomography Inspection (CT)
Computed Tomography (CT) offers a three-dimensional X-Ray view into the inspection item. Inspections are performed inside a fixed or inline X-Ray chamber for production applications.
Technicians are Certified in Accordance with National Aerospace Standards (NAS-410)
 
 
 
 
 
CONTACT US

TEL: (650) 354-1399
FAX: (650) 354-1395

info@victor-aviation.com


US Federal Contractor Registration
FAA Repair Station #BJ3R399L


Authorized Product Support Center and Warranty Repair Station

Copyright © 2016 Victor Aviation Service, Inc. 
All Right Reserved

Sign up for UPDATES
Join Our Newsletter by entering your email address. click here!
Facebook twitter YouTube
Back To Top